Gummy Bear Terpene Blend
Gummy Bear Terpene Blend
Denver Terpenes Shop

Gummy Bear Terpene Blend

Regular price $15.00 $0.00 Unit price per
Shipping calculated at checkout.

Have you ever wanted to capture the sweet taste of your favorite berry-filled candy and all its potency in one strain? Gummy Bears is here! Combining Trueberry with Big Lemon, once grown properly this delightful hybrid will delight your palette with a flavor like berries dipped in lemonade. Plus, enjoy a manageable buzz without being knocked out for hours on end - making it perfect for any time of day. So don't hold back; come indulge yourself in these gooey classic gummy goodness

 

INGREDIENTS
(CAS-No.)
ALPHA PINENE  7785-26-4 
ORANGE TERPENES 68647-72-3 
LEMON OIL TERPENES  68917-33-9 
LIME OIL TERPENES  68917-71-5
BETA PINENE  127-91-3 
TERPINOLENE  586-62-9 
LINALOOL 78-70-6 
ALLYL HEXANOATE  123-68-2
CITRAL 5392-40-5
ETHYL CAPROATE  123-66-0 
GERANIOL 106-24-1 

How to Use Terpenes

Use 1%-5% by weight


Warm up your concentrate as you normally would. Calculate how much terpenes you will need to use, by weight. Always measure by weight, and never by the drop. We will use an example of a 100g batch, and our average add back rate of 4%. Using a calculator, input 100 x 0.04 (4%). You should get an answer of 4 grams.

1. WARM MATERIAL AND CALCULATE ADD BACK RATE
Remove your concentrate from heat and allow it to cool down enough so that you can still manipulate it. Concentrates should at the very most be 100°F at the time of adding terpenes.

2. ALLOW MATERIAL TO COOL
Take a pyrex beaker and a scale that is accurate to at least 0.00 decimal places. Place the beaker on the scale, and using the same example of 4% usage in a 100g batch, carefully weigh out 4g of terpenes, using a disposable plastic pipette. Set aside in preparation for mixing.

3. WEIGH TERPENES
Once your material is at 100°F or less, it is time to add back the 4g of terpenes. Pour them into the concentrate , and using either a magnetic stir bar or a hand tool, mix the solution for up to 20 minutes.

4. ADD AND MIX
Many people make the mistake of tasting the product right after mixing. It is always better to let the solution sit for 24 hours. Once it has steeped for a day, and it has passed your visual test, you may apply it to whichever end product the material is going into and give it an official taste test.

5. WAIT AND TASTE
Once you are satisfied with your end product, it is ready to go into production. If this is the first time you have developed this product, be sure to document your add back rate for each terpene product for future use. Always store your finished product between 60° and 75°F. This will help prevent separation, crystallization, and oxidation.

Does NOT contain THC or CBD as all of our products are botanically derived from plants and NOT cannabis or hemp.


Share this Product


Have you ever wanted to capture the sweet taste of your favorite berry-filled candy and all its potency in one strain? Gummy Bears is here! Combining Trueberry with Big Lemon, once grown properly this delightful hybrid will delight your palette with a flavor like berries dipped in lemonade. Plus, enjoy a manageable buzz without being knocked out for hours on end - making it perfect for any time of day. So don't hold back; come indulge yourself in these gooey classic gummy goodness

 

INGREDIENTS
(CAS-No.)
ALPHA PINENE  7785-26-4 
ORANGE TERPENES 68647-72-3 
LEMON OIL TERPENES  68917-33-9 
LIME OIL TERPENES  68917-71-5
BETA PINENE  127-91-3 
TERPINOLENE  586-62-9 
LINALOOL 78-70-6 
ALLYL HEXANOATE  123-68-2
CITRAL 5392-40-5
ETHYL CAPROATE  123-66-0 
GERANIOL 106-24-1 

How to Use Terpenes

Use 1%-5% by weight


Warm up your concentrate as you normally would. Calculate how much terpenes you will need to use, by weight. Always measure by weight, and never by the drop. We will use an example of a 100g batch, and our average add back rate of 4%. Using a calculator, input 100 x 0.04 (4%). You should get an answer of 4 grams.

1. WARM MATERIAL AND CALCULATE ADD BACK RATE
Remove your concentrate from heat and allow it to cool down enough so that you can still manipulate it. Concentrates should at the very most be 100°F at the time of adding terpenes.

2. ALLOW MATERIAL TO COOL
Take a pyrex beaker and a scale that is accurate to at least 0.00 decimal places. Place the beaker on the scale, and using the same example of 4% usage in a 100g batch, carefully weigh out 4g of terpenes, using a disposable plastic pipette. Set aside in preparation for mixing.

3. WEIGH TERPENES
Once your material is at 100°F or less, it is time to add back the 4g of terpenes. Pour them into the concentrate , and using either a magnetic stir bar or a hand tool, mix the solution for up to 20 minutes.

4. ADD AND MIX
Many people make the mistake of tasting the product right after mixing. It is always better to let the solution sit for 24 hours. Once it has steeped for a day, and it has passed your visual test, you may apply it to whichever end product the material is going into and give it an official taste test.

5. WAIT AND TASTE
Once you are satisfied with your end product, it is ready to go into production. If this is the first time you have developed this product, be sure to document your add back rate for each terpene product for future use. Always store your finished product between 60° and 75°F. This will help prevent separation, crystallization, and oxidation.