Runtz Full Spectrum Terpene Blend
Runtz Full Spectrum Terpene Blend
Denver Terpenes Shop

Runtz Full Spectrum Terpene Blend

Regular price $20.00 $0.00 Unit price per
Shipping calculated at checkout.

Did someone say ‘Candyland in a joint’? Introducing the newest and hottest trend – Runtz, an outrageously tasty hybrid weed that takes its name from everyone's favorite sugary treat. It seems like 2020 was sweet enough with the award winning strain scooping Leafly Strain of The Year honors - who said candy isn't good for you?!


Ingredients:

(CAS-No.)

BETA CARYOPHYLLENE  87-44-5 
TERPINOLENE  586-62-9
ORANGE TERPENES  68647-72-3 
MYRCENE  123-35-3 
BETA PINENE 127-91-3 
ALPHA PINENE  7785-26-4 
ALPHA TERPINEOL  98-55-5
GRAPEFRUIT OIL TERPENES  68917-32-8
LINALOOL 78-70-6
Orange oil, sweet, terpenes  8028-48-6 
PHELLANDRENE  99-83-2
PHYTOL  150-86-7
3-CARENE*  13466-78-9
ORANGE OIL 8028-48-6 
GERANYL ACETATE 105-87-3 

    How to Use Terpenes

    Use 1%-5% by weight


    Warm up your concentrate as you normally would. Calculate how much terpenes you will need to use, by weight. Always measure by weight, and never by the drop. We will use an example of a 100g batch, and our average add back rate of 4%. Using a calculator, input 100 x 0.04 (4%). You should get an answer of 4 grams.

    1. WARM MATERIAL AND CALCULATE ADD BACK RATE
    Remove your concentrate from heat and allow it to cool down enough so that you can still manipulate it. Concentrates should at the very most be 100°F at the time of adding terpenes.

    2. ALLOW MATERIAL TO COOL
    Take a pyrex beaker and a scale that is accurate to at least 0.00 decimal places. Place the beaker on the scale, and using the same example of 4% usage in a 100g batch, carefully weigh out 4g of terpenes, using a disposable plastic pipette. Set aside in preparation for mixing.

    3. WEIGH TERPENES
    Once your material is at 100°F or less, it is time to add back the 4g of terpenes. Pour them into the concentrate , and using either a magnetic stir bar or a hand tool, mix the solution for up to 20 minutes.

    4. ADD AND MIX
    Many people make the mistake of tasting the product right after mixing. It is always better to let the solution sit for 24 hours. Once it has steeped for a day, and it has passed your visual test, you may apply it to whichever end product the material is going into and give it an official taste test.

    5. WAIT AND TASTE
    Once you are satisfied with your end product, it is ready to go into production. If this is the first time you have developed this product, be sure to document your add back rate for each terpene product for future use. Always store your finished product between 60° and 75°F. This will help prevent separation, crystallization, and oxidation.

    Does NOT contain THC or CBD as all of our products are botanically derived from plants and NOT cannabis or hemp.


    Share this Product


    Did someone say ‘Candyland in a joint’? Introducing the newest and hottest trend – Runtz, an outrageously tasty hybrid weed that takes its name from everyone's favorite sugary treat. It seems like 2020 was sweet enough with the award winning strain scooping Leafly Strain of The Year honors - who said candy isn't good for you?!


    Ingredients:

    (CAS-No.)

    BETA CARYOPHYLLENE  87-44-5 
    TERPINOLENE  586-62-9
    ORANGE TERPENES  68647-72-3 
    MYRCENE  123-35-3 
    BETA PINENE 127-91-3 
    ALPHA PINENE  7785-26-4 
    ALPHA TERPINEOL  98-55-5
    GRAPEFRUIT OIL TERPENES  68917-32-8
    LINALOOL 78-70-6
    Orange oil, sweet, terpenes  8028-48-6 
    PHELLANDRENE  99-83-2
    PHYTOL  150-86-7
    3-CARENE*  13466-78-9
    ORANGE OIL 8028-48-6 
    GERANYL ACETATE 105-87-3 

      How to Use Terpenes

      Use 1%-5% by weight


      Warm up your concentrate as you normally would. Calculate how much terpenes you will need to use, by weight. Always measure by weight, and never by the drop. We will use an example of a 100g batch, and our average add back rate of 4%. Using a calculator, input 100 x 0.04 (4%). You should get an answer of 4 grams.

      1. WARM MATERIAL AND CALCULATE ADD BACK RATE
      Remove your concentrate from heat and allow it to cool down enough so that you can still manipulate it. Concentrates should at the very most be 100°F at the time of adding terpenes.

      2. ALLOW MATERIAL TO COOL
      Take a pyrex beaker and a scale that is accurate to at least 0.00 decimal places. Place the beaker on the scale, and using the same example of 4% usage in a 100g batch, carefully weigh out 4g of terpenes, using a disposable plastic pipette. Set aside in preparation for mixing.

      3. WEIGH TERPENES
      Once your material is at 100°F or less, it is time to add back the 4g of terpenes. Pour them into the concentrate , and using either a magnetic stir bar or a hand tool, mix the solution for up to 20 minutes.

      4. ADD AND MIX
      Many people make the mistake of tasting the product right after mixing. It is always better to let the solution sit for 24 hours. Once it has steeped for a day, and it has passed your visual test, you may apply it to whichever end product the material is going into and give it an official taste test.

      5. WAIT AND TASTE
      Once you are satisfied with your end product, it is ready to go into production. If this is the first time you have developed this product, be sure to document your add back rate for each terpene product for future use. Always store your finished product between 60° and 75°F. This will help prevent separation, crystallization, and oxidation.